Engineered for absolute waterproofing on sloped surfaces while actively reducing thermal stress and metal corrosion.
Surface Dry Time
Temp Reduction
Optimal Coats
Added Lifespan
Complete material intelligence, directly accessible.
GURTEX® SG 168 is a single-component, white, water-based emulsion coating formulated from advanced polymer resins, natural latex, silane copolymers, and UV-reflective materials. It is engineered specifically to provide waterproofing, heat-resistance, and anti-corrosive properties for industrial and construction applications.
| Physical State & Color | Single-component, White liquid emulsion |
|---|---|
| Solid Content | ≤ 40% |
| Surface Dry Time | ≤ 30 minutes @ 25°C |
| Full Cure Time | ≤ 48 hours @ 25°C |
| Recommended Coverage | 0.5 - 1.5 kg/m² (Total across 2-3 coats) |
| Layer Thickness (Final Build) | 0.5 - 1.0 mm |
| Packaging Configuration | 20 kg Pail |
| HS Code | 4021100 |
Remove all dust, dirt, oil, and loose debris. Surface must be completely dry before application. Substrate must be sloped at a minimum gradient of 2%.
Apply three (3) coats of GURTEX® SG368 undercoat by brush, roller, or spray. Allow them to dry completely.
Apply the 1st and 2nd coats of SG168 using slow, smooth, crisscross overlapping strokes. Allow 4 hours minimum drying time between coats at 25°C.
Build up layers until the total thickness of the coating reaches 0.5 - 1 mm. Do not apply excessively thick layers, as this may cause cracking.
This membrane system is not suitable for areas subjected to long-term ponding or standing water. Adequate surface drainage slope is mandatory.
This product is not designed to withstand heavy foot traffic or mechanical wear. Application must be limited to sloped, non-traffic exterior surfaces.
Do not apply when substrate temperature exceeds 40°C. If relative humidity exceeds 80%, the standard curing time will be extended by approximately 3 days.