Icon
+62 811-3800-075 sales@gurtexwaterproofing.com
Gurtex SG918 clear waterproof paint coating applied to cement and bamboo surfaces
Invisible Protection

GURTEX® SG918

Water-Based Clear Paint Coating for Cement & Bamboo.

Formulated with silicone-acrylic acid copolymers to provide a hard, compacted, and translucent waterproof barrier that preserves the natural aesthetic of your decorative surfaces.

Gurtex SG918 transparent waterproof coating protecting exposed fair-faced concrete and natural bamboo
Clear Coating

30μm

Dry Film Thickness

85-90KU

Viscosity (@ 25°C)

0.12kg

Optimal Dosage / m²

2Hrs

Surface Dry Time

Compliance & Safety

Official Technical Documents

SG918 TDS Technical Data Sheet
SG918 MSDS Material Safety Data

Technical Specifications

Data-driven answers based on official SG918 laboratory tests.

Core Performance

The dry coating film thickness is 30μm per layer, providing a compacted and hard protection without altering the surface appearance.

No, it is a clear/translucent liquid binder that preserves the natural look of cement and bamboo surfaces while adding a dull matte, matte, or high-gloss finish.

Application Guidelines

The theoretical dosage is 0.12-0.15 kg/m² per coat, which allows approximately 120m² of coverage per pail depending on substrate porosity.

Surface drying takes about 2 hours under standard conditions (25°C and 50% relative humidity or below).

Limitations & Safety

No. Avoid application if the substrate temperature exceeds 40°C. You must also avoid exposing the newly applied wet coating to direct harsh sunlight immediately.

SG918 is specifically designed for unpainted cement, fair-faced concrete, and bamboo surfaces. It may not adhere properly to existing painted surfaces, so stripping old paint is strictly recommended.

Address

Jl. Bypass Ngurah Rai No.22, Kedonganan, Kec. Kuta, Kabupaten Badung, Bali 80361

+62 811-3800-075

sales@gurtexwaterproofing.com

Chat with Experts